NTP : Configure NTP Client2024/10/31 |
Configure NTP Client.
|
|
[1] | Client configuration is mostly the same with Server's one, however NTP Clients does not need to receive time synchronization requests from other hosts, so it does not need to specify the ACL line [allow ***]. |
[root@node01 ~]#
dnf -y install chrony
[root@node01 ~]#
vi /etc/chrony.conf # line 3 : change to your own NTP server or others in your timezone # pool 2.fedora.pool.ntp.org iburst
pool dlp.srv.world iburst
[root@node01 ~]#
systemctl enable --now chronyd
# verify status [root@node01 ~]# chronyc sources MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== ^* dlp.srv.world 2 6 17 17 +40us[ +36us] +/- 9325us |
[2] | To Install NTPStat, it's possible to display time synchronization status. |
[root@node01 ~]#
[root@node01 ~]# dnf -y install ntpstat ntpstat synchronised to NTP server (10.0.0.30) at stratum 3 time correct to within 12 ms polling server every 64 s |
Sponsored Link |
|