NTP : Configure NTP Server2023/04/21 |
|
Install Chrony to Configure NTP Server for Time Synchronization.
|
|
| [1] | Install and Configure Chrony. |
|
[root@dlp ~]#
dnf -y install chrony
[root@dlp ~]#
vi /etc/chrony.conf # line 3: change servers to synchronize (replace to your own timezone NTP server) # need NTP server itself to sync time with other NTP server # pool 2.centos.pool.ntp.org iburst
pool ntp.nict.jp iburst
# line 27: add network range to allow to receive time synchronization requests from NTP Clients # specify your local network and so on # if not specified, only localhost is allowed
allow 10.0.0.0/24
systemctl enable --now chronyd |
| [2] | If Firewalld is running, allow NTP service. NTP uses [123/UDP]. |
|
[root@dlp ~]# firewall-cmd --add-service=ntp success [root@dlp ~]# firewall-cmd --runtime-to-permanent success |
| [3] | Verify it works normally. |
|
[root@dlp ~]# chronyc sources MS Name/IP address Stratum Poll Reach LastRx Last sample =============================================================================== ^? ntp-b2.nict.go.jp 1 6 3 2 -1112us[-1112us] +/- 10ms ^? ntp-k1.nict.jp 1 6 3 2 -906us[ -906us] +/- 7031us ^+ ntp-a2.nict.go.jp 1 6 7 1 -23us[-1545us] +/- 11ms ^* ntp-b3.nict.go.jp 1 6 7 1 +313us[-1210us] +/- 11ms |
| Sponsored Link |
|
|