Fedora 33
Sponsored Link

NTP : Configure NTP Server
2020/11/02
 
Install Chrony to Configure NTP Server for Time Synchronization.
[1] Install and Configure Chrony.
[root@dlp ~]#
dnf -y install chrony
[root@dlp ~]#
vi /etc/chrony.conf
# line 3: change servers to synchronize (replace to your own timezone NTP server)

# need NTP server itself to sync time with other NTP server

#
pool 2.centos.pool.ntp.org iburst
pool ntp.nict.jp iburst
# line 27: add network range to allow to receive time synchronization requests from NTP Clients

# specify your local network and so on

# if not specified, only localhost is allowed

allow 10.0.0.0/24
[root@dlp ~]#
systemctl enable --now chronyd

[2] If Firewalld is running, allow NTP service. NTP uses [123/UDP].
[root@dlp ~]#
firewall-cmd --add-service=ntp --permanent

success
[root@dlp ~]#
firewall-cmd --reload

success
[3] Verify it works normally.
[root@dlp ~]#
chronyc sources

MS Name/IP address         Stratum Poll Reach LastRx Last sample
===============================================================================
^- ntp-b2.nict.go.jp             1   6    17    10   -426us[ -426us] +/- 9644us
^- ntp-a2.nict.go.jp             1   6    17    10  +1532us[+1532us] +/- 8616us
^* ntp-b3.nict.go.jp             1   6    17    11   +296us[-1249us] +/- 9808us
^- ntp-a3.nict.go.jp             1   6    17    11  +1449us[+1449us] +/- 7797us
Matched Content