Fedora 31
Sponsored Link

NTP : Configure Server2019/11/12

 
Install Chrony to Configure NTP Server for Time Synchronization.
[1] Install and Configure Chrony.
[root@dlp ~]#
dnf -y install chrony
[root@dlp ~]#
vi /etc/chrony.conf
# line 3: change servers to synchronize (replace to your own timezone NTP server)

# need NTP server itself to sync time with other NTP server

#
pool 2.centos.pool.ntp.org iburst
pool ntp.nict.jp iburst
# line 24: add network range to allow to receive time synchronization requests from NTP Clients

# specify your local network and so on

# if not specified, only localhost is allowed

allow 10.0.0.0/24
[root@dlp ~]#
systemctl enable --now chronyd

[2] If Firewalld is running, allow NTP service. NTP uses [123/UDP].
[root@dlp ~]#
firewall-cmd --add-service=ntp --permanent

success
[root@dlp ~]#
firewall-cmd --reload

success
[3] Verify it works normally.
[root@dlp ~]#
chronyc sources

210 Number of sources = 4
MS Name/IP address         Stratum Poll Reach LastRx Last sample
===============================================================================
^- ntp-a3.nict.go.jp             1   6    17     8   -737us[ -737us] +/-   10ms
^- ntp-b3.nict.go.jp             1   6    17     8  -1502us[-1502us] +/-   10ms
^- ntp-b2.nict.go.jp             1   6    17     8  -2344us[-2344us] +/-   12ms
^* ntp-a2.nict.go.jp             1   6    17     9   +200us[ +852us] +/- 9250us
Matched Content