CentOS Stream 9
Sponsored Link

Pacemaker : Install2022/03/25

 
Install and Configure Linux High Availability System, Pacemaker.
This example is based on the environment like follows.
                                  |
+----------------------+          |          +----------------------+
| [  Cluster Node#1  ] |10.0.0.51 | 10.0.0.52| [  Cluster Node#2  ] |
|   node01.srv.world   +----------+----------+   node02.srv.world   |
|                      |                     |                      |
+----------------------+                     +----------------------+

[1] On all Nodes, Install Pacemaker and configure some settings.
# enable [HighAvailability] repo and install (disabled by default)

[root@node01 ~]#
dnf --enablerepo=highavailability -y install pacemaker pcs
[root@node01 ~]#
systemctl enable --now pcsd
# set cluster admin password

[root@node01 ~]#
passwd hacluster

Changing password for user hacluster.
New password:
Retype new password:
passwd: all authentication tokens updated successfully.
[2] On all Nodes, If Firewalld is running, allow HA service.
[root@node01 ~]#
firewall-cmd --add-service=high-availability

success
[root@node01 ~]#
firewall-cmd --runtime-to-permanent

success
[3] On a Node, Configure basic Cluster settings.
# authorize among nodes

[root@node01 ~]#
pcs host auth node01.srv.world node02.srv.world

Username:
hacluster

Password:
node01.srv.world: Authorized
node02.srv.world: Authorized
# configure cluster

[root@node01 ~]#
pcs cluster setup ha_cluster node01.srv.world node02.srv.world

No addresses specified for host 'node01.srv.world', using 'node01.srv.world'
No addresses specified for host 'node02.srv.world', using 'node02.srv.world'
Destroying cluster on hosts: 'node01.srv.world', 'node02.srv.world'...
node02.srv.world: Successfully destroyed cluster
node01.srv.world: Successfully destroyed cluster
Requesting remove 'pcsd settings' from 'node01.srv.world', 'node02.srv.world'
node01.srv.world: successful removal of the file 'pcsd settings'
node02.srv.world: successful removal of the file 'pcsd settings'
Sending 'corosync authkey', 'pacemaker authkey' to 'node01.srv.world', 'node02.srv.world'
node01.srv.world: successful distribution of the file 'corosync authkey'
node01.srv.world: successful distribution of the file 'pacemaker authkey'
node02.srv.world: successful distribution of the file 'corosync authkey'
node02.srv.world: successful distribution of the file 'pacemaker authkey'
Sending 'corosync.conf' to 'node01.srv.world', 'node02.srv.world'
node01.srv.world: successful distribution of the file 'corosync.conf'
node02.srv.world: successful distribution of the file 'corosync.conf'
Cluster has been successfully set up.

# start services for cluster

[root@node01 ~]#
pcs cluster start --all

node01.srv.world: Starting Cluster...
node02.srv.world: Starting Cluster...
# set auto-start

[root@node01 ~]#
pcs cluster enable --all

node01.srv.world: Cluster Enabled
node02.srv.world: Cluster Enabled
# show status

[root@node01 ~]#
pcs cluster status

Cluster Status:
 Cluster Summary:
   * Stack: corosync
   * Current DC: node01.srv.world (version 2.1.2-4.el9-ada5c3b36e2) - partition with quorum
   * Last updated: Fri Mar 25 09:00:16 2022
   * Last change:  Fri Mar 25 09:00:13 2022 by hacluster via crmd on node01.srv.world
   * 2 nodes configured
   * 0 resource instances configured
 Node List:
   * Online: [ node01.srv.world node02.srv.world ]

PCSD Status:
  node01.srv.world: Online
  node02.srv.world: Online

[root@node01 ~]#
pcs status corosync


Membership information
----------------------
    Nodeid      Votes Name
         1          1 node01.srv.world (local)
         2          1 node02.srv.world
[4] If you'd like to remove all cluster settings to initialize, run like follows.
[root@node01 ~]#
pcs cluster stop --all

node01.srv.world: Stopping Cluster (pacemaker)...
node02.srv.world: Stopping Cluster (pacemaker)...
node01.srv.world: Stopping Cluster (corosync)...
node02.srv.world: Stopping Cluster (corosync)...

[root@node01 ~]#
pcs cluster destroy --all

Warning: It is recommended to run 'pcs cluster stop' before destroying the cluster.
WARNING: This would kill all cluster processes and then PERMANENTLY remove cluster state and configuration
Type 'yes' or 'y' to proceed, anything else to cancel: yes
Warning: Unable to load CIB to get guest and remote nodes from it, those nodes will not be deconfigured.
node02.srv.world: Stopping Cluster (pacemaker)...
node01.srv.world: Stopping Cluster (pacemaker)...
node02.srv.world: Successfully destroyed cluster
node01.srv.world: Successfully destroyed cluster
Matched Content