CentOS 8
Sponsored Link

OpenStack Victoria : Configure Neutron (Control Node)2020/11/17

 
Configure OpenStack Network Service (Neutron).
This example is not on the All in One Settings like here, but Configure the 3 Nodes environment like follows.
Neutron needs a plugin software, it's possible to choose it from some softwares.
It chooses ML2 plugin on this example. ( it uses Open vSwitch under the backend )
------------+---------------------------+---------------------------+------------
            |                           |                           |
        eth0|10.0.0.30              eth0|10.0.0.50              eth0|10.0.0.51
+-----------+-----------+   +-----------+-----------+   +-----------+-----------+
|    [ Control Node ]   |   |    [ Network Node ]   |   |    [ Compute Node ]   |
|                       |   |                       |   |                       |
|  MariaDB    RabbitMQ  |   |      Open vSwitch     |   |        Libvirt        |
|  Memcached  httpd     |   |        L2 Agent       |   |     Nova Compute      |
|  Keystone   Glance    |   |        L3 Agent       |   |      Open vSwitch     |
|  Nova API             |   |     Metadata Agent    |   |        L2 Agent       |
|  Neutron Server       |   |                       |   |                       |
|  Metadata Agent       |   |                       |   |                       |
+-----------------------+   +-----------------------+   +-----------------------+

[1]
[2] Install Neutron Server on Control Host.
# install from Victoria, EPEL, powertools

[root@dlp ~(keystone)]#
dnf --enablerepo=centos-openstack-victoria,powertools,epel -y install openstack-neutron openstack-neutron-ml2
[3] Configure Neutron Server.
[root@dlp ~(keystone)]#
mv /etc/neutron/neutron.conf /etc/neutron/neutron.conf.org

[root@dlp ~(keystone)]#
vi /etc/neutron/neutron.conf
# create new

[DEFAULT]
core_plugin = ml2
service_plugins = router
auth_strategy = keystone
state_path = /var/lib/neutron
dhcp_agent_notification = True
allow_overlapping_ips = True
notify_nova_on_port_status_changes = True
notify_nova_on_port_data_changes = True
# RabbitMQ connection info
transport_url = rabbit://openstack:password@10.0.0.30

# Keystone auth info
[keystone_authtoken]
www_authenticate_uri = http://10.0.0.30:5000
auth_url = http://10.0.0.30:5000
memcached_servers = 10.0.0.30:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = neutron
password = servicepassword

# MariaDB connection info
[database]
connection = mysql+pymysql://neutron:password@10.0.0.30/neutron_ml2

# Nova connection info
[nova]
auth_url = http://10.0.0.30:5000
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = nova
password = servicepassword

[oslo_concurrency]
lock_path = $state_path/tmp

[root@dlp ~(keystone)]#
chmod 640 /etc/neutron/neutron.conf

[root@dlp ~(keystone)]#
chgrp neutron /etc/neutron/neutron.conf

[root@dlp ~(keystone)]#
vi /etc/neutron/metadata_agent.ini
[DEFAULT]
# line 2: add

# specify Nova API server

nova_metadata_host = 10.0.0.30
# specify any secret key you like

metadata_proxy_shared_secret = metadata_secret
# line 219: add to specify Memcache server

memcache_servers = 10.0.0.30:11211
[root@dlp ~(keystone)]#
vi /etc/neutron/plugins/ml2/ml2_conf.ini
# add to the end

# OK with no value for [tenant_network_types] (set later if need)

[ml2]
type_drivers = flat,vlan,gre,vxlan
tenant_network_types =
mechanism_drivers = openvswitch
extension_drivers = port_security
[root@dlp ~(keystone)]#
vi /etc/nova/nova.conf
# add follows into [DEFAULT] section

use_neutron = True
linuxnet_interface_driver = nova.network.linux_net.LinuxOVSInterfaceDriver
firewall_driver = nova.virt.firewall.NoopFirewallDriver

# add follows to the end : Neutron auth info
# the value of [metadata_proxy_shared_secret] is the same with the one in [metadata_agent.ini]
[neutron]
auth_url = http://10.0.0.30:5000
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = neutron
password = servicepassword
service_metadata_proxy = True
metadata_proxy_shared_secret = metadata_secret
[4] If SELinux is enabled, change policy.
[root@dlp ~(keystone)]#
dnf --enablerepo=centos-openstack-victoria -y install openstack-selinux

[root@dlp ~(keystone)]#
setsebool -P neutron_can_network on

[root@dlp ~(keystone)]#
setsebool -P daemons_enable_cluster_mode on

[5] If Firewalld is running, allow service ports.
[root@dlp ~(keystone)]#
firewall-cmd --add-port=9696/tcp --permanent

success
[root@dlp ~(keystone)]#
firewall-cmd --reload

success
[6] Start Neutron server.
[root@dlp ~(keystone)]#
ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini

[root@dlp ~(keystone)]#
su -s /bin/bash neutron -c "neutron-db-manage --config-file /etc/neutron/neutron.conf --config-file /etc/neutron/plugin.ini upgrade head"

[root@dlp ~(keystone)]#
systemctl enable --now neutron-server neutron-metadata-agent

[root@dlp ~(keystone)]#
systemctl restart openstack-nova-api

Matched Content