CentOS 8
Sponsored Link

FreeIPA : Configure Server
2019/10/15
 
Configure FreeIPA Server that is an integrated security information management System.
( called [Red Hat Identity Management] on RHEL )
[1] Install FreeIPA Packages.
[root@dlp ~]#
dnf module -y install idm:DL1/dns
[2] Setup FreeIPA Server with integrated DNS feature.
# add own hostname

[root@dlp ~]#
echo '10.0.0.30 dlp.ipa.srv.world dlp' >> /etc/hosts

[root@dlp ~]#
ipa-server-install --setup-dns


The log file for this installation can be found in /var/log/ipaserver-install.log
==============================================================================
This program will set up the IPA Server.
Version 4.7.1

This includes:
  * Configure a stand-alone CA (dogtag) for certificate management
  * Configure the NTP client (chronyd)
  * Create and configure an instance of Directory Server
  * Create and configure a Kerberos Key Distribution Center (KDC)
  * Configure Apache (httpd)
  * Configure DNS (bind)
  * Configure the KDC to enable PKINIT

To accept the default shown in brackets, press the Enter key.

Enter the fully qualified domain name of the computer
on which you're setting up server software. Using the form
<hostname>.<domainname>
Example: master.example.com.

# confirm hostname and Enter
Server host name [dlp.ipa.srv.world]:

Warning: skipping DNS resolution of host dlp.ipa.srv.world
The domain name has been determined based on the host name.

# confirm domain name and Enter
Please confirm the domain name [ipa.srv.world]:

The kerberos protocol requires a Realm name to be defined.
This is typically the domain name converted to uppercase.

# confirm realm name and Enter
Please provide a realm name [IPA.SRV.WORLD]:
Certain directory server operations require an administrative user.
This user is referred to as the Directory Manager and has full access
to the Directory for system management tasks and will be added to the
instance of directory server created for IPA.
The password must be at least 8 characters long.

# set Directory Manager password
Directory Manager password:
Password (confirm):

The IPA server requires an administrative user, named 'admin'.
This user is a regular system account used for IPA server administration.

# set IPA admin password
IPA admin password:
Password (confirm):

Checking DNS domain ipa.srv.world., please wait ...
Do you want to configure DNS forwarders? [yes]:
Following DNS servers are configured in /etc/resolv.conf: 10.0.0.10
# if you set DNS forwarder, answer [yes]
Do you want to configure these servers as DNS forwarders? [yes]:
All DNS servers from /etc/resolv.conf were added. You can enter additional addresses now:
Enter an IP address for a DNS forwarder, or press Enter to skip:
Checking DNS forwarders, please wait ...
DNS server 10.0.0.10 does not support DNSSEC: answer to query '. SOA' is missing DNSSEC signatures (no RRSIG data)
Please fix forwarder configuration to enable DNSSEC support.
(For BIND 9 add directive "dnssec-enable yes;" to "options {}")
DNS server 10.0.0.10: answer to query '. SOA' is missing DNSSEC signatures (no RRSIG data)
Please fix forwarder configuration to enable DNSSEC support.
(For BIND 9 add directive "dnssec-enable yes;" to "options {}")
WARNING: DNSSEC validation will be disabled
# if you search reverse zone of DNS forwarder, answer [yes]
Do you want to search for missing reverse zones? [yes]:
Reverse record for IP address 10.0.0.30 already exists

The IPA Master Server will be configured with:
Hostname:       dlp.ipa.srv.world
IP address(es): 10.0.0.30
Domain name:    ipa.srv.world
Realm name:     IPA.SRV.WORLD

The CA will be configured with:
Subject DN:   CN=Certificate Authority,O=IPA.SRV.WORLD
Subject base: O=IPA.SRV.WORLD
Chaining:     self-signed

BIND DNS server will be configured to serve IPA domain with:
Forwarders:       10.0.0.10
Forward policy:   only
Reverse zone(s):  No reverse zone

# confirm settings and proceed with [yes]
Continue to configure the system with these values? [no]: yes

The following operations may take some minutes to complete.
Please wait until the prompt is returned.

Synchronizing time
No SRV records of NTP servers found and no NTP server or pool address was provided.
Using default chrony configuration.
Attempting to sync time with chronyc.
Time synchronization was successful.
Configuring directory server (dirsrv). Estimated time: 30 seconds
  [1/44]: creating directory server instance
  [2/44]: enabling ldapi
  [3/44]: configure autobind for root
.....
.....
==============================================================================
Setup complete

Next steps:
        1. You must make sure these network ports are open:
                TCP Ports:
                  * 80, 443: HTTP/HTTPS
                  * 389, 636: LDAP/LDAPS
                  * 88, 464: kerberos
                  * 53: bind
                UDP Ports:
                  * 88, 464: kerberos
                  * 53: bind
                  * 123: ntp

        2. You can now obtain a kerberos ticket using the command: 'kinit admin'
           This ticket will allow you to use the IPA tools (e.g., ipa user-add)
           and the web user interface.

Be sure to back up the CA certificates stored in /root/cacert.p12
These files are required to create replicas. The password for these
files is the Directory Manager password
The ipa-server-install command was successful
[3] Get Kerberos Ticket.
[root@dlp ~]#
kinit admin

Password for admin@IPA.SRV.WORLD:    
# IPA admin password

[root@dlp ~]#
klist

Ticket cache: KCM:0
Default principal: admin@IPA.SRV.WORLD

Valid starting       Expires              Service principal
10/14/2019 19:42:12  10/15/2019 19:42:09  krbtgt/IPA.SRV.WORLD@IPA.SRV.WORLD
[4] If Firewalld is running, allow services.
[root@dlp ~]#
firewall-cmd --add-service={freeipa-ldap,freeipa-ldaps,dns,ntp} --permanent

success
[root@dlp ~]#
firewall-cmd --reload

success
Matched Content