Kubernetes : Control Plane नोड कॉन्फ़िगर करें2023/09/04 |
मल्टी नोड्स Kubernetes क्लस्टर को कॉन्फ़िगर करने के लिए Kubeadm स्थापित करें।
यह उदाहरण निम्न प्रकार से पर्यावरण पर आधारित है।
-----------+---------------------------+--------------------------+------------ | | | eth0|10.0.0.25 eth0|10.0.0.71 eth0|10.0.0.72 +----------+-----------+ +-----------+-----------+ +-----------+-----------+ | [ ctrl.srv.world ] | | [snode01.srv.world] | | [snode02.srv.world] | | Control Plane | | Worker Node | | Worker Node | +----------------------+ +-----------------------+ +-----------------------+ |
[1] |
[2] |
Control Plane नोड पर प्रारंभिक सेटअप कॉन्फ़िगर करें।
[control-plane-endpoint] के लिए, होस्टनाम या आईपी पता निर्दिष्ट करें जिस पर Etcd और Kubernetes API सर्वर चलाए जाते हैं।
[--pod-network-cidr] विकल्प के लिए, वह नेटवर्क निर्दिष्ट करें जिसका उपयोग Pod नेटवर्क करता है।
पॉड नेटवर्क के लिए कुछ प्लगइन्स हैं। (नीचे विवरण देखें)
⇒ https://kubernetes.io/docs/concepts/cluster-administration/networking/
इस उदाहरण पर, यह Calico का उपयोग करता है।
|
root@ctrl:~# kubeadm init --control-plane-endpoint=10.0.0.25 --pod-network-cidr=192.168.0.0/16 --cri-socket=unix:///run/containerd/containerd.sock
[init] Using Kubernetes version: v1.25.3
[preflight] Running pre-flight checks
[preflight] Pulling images required for setting up a Kubernetes cluster
[preflight] This might take a minute or two, depending on the speed of your internet connection
[preflight] You can also perform this action in beforehand using 'kubeadm config images pull'
[certs] Using certificateDir folder "/etc/kubernetes/pki"
[certs] Generating "ca" certificate and key
[certs] Generating "apiserver" certificate and key
[certs] apiserver serving cert is signed for DNS names [ctrl.srv.world kubernetes kubernetes.default kubernetes.default.svc kubernetes.default.svc.cluster.local] and IPs [10.96.0.1 10.0.0.25]
[certs] Generating "apiserver-kubelet-client" certificate and key
[certs] Generating "front-proxy-ca" certificate and key
[certs] Generating "front-proxy-client" certificate and key
[certs] Generating "etcd/ca" certificate and key
[certs] Generating "etcd/server" certificate and key
[certs] etcd/server serving cert is signed for DNS names [ctrl.srv.world localhost] and IPs [10.0.0.25 127.0.0.1 ::1]
[certs] Generating "etcd/peer" certificate and key
[certs] etcd/peer serving cert is signed for DNS names [ctrl.srv.world localhost] and IPs [10.0.0.25 127.0.0.1 ::1]
[certs] Generating "etcd/healthcheck-client" certificate and key
[certs] Generating "apiserver-etcd-client" certificate and key
[certs] Generating "sa" key and public key
[kubeconfig] Using kubeconfig folder "/etc/kubernetes"
[kubeconfig] Writing "admin.conf" kubeconfig file
[kubeconfig] Writing "kubelet.conf" kubeconfig file
[kubeconfig] Writing "controller-manager.conf" kubeconfig file
[kubeconfig] Writing "scheduler.conf" kubeconfig file
[kubelet-start] Writing kubelet environment file with flags to file "/var/lib/kubelet/kubeadm-flags.env"
[kubelet-start] Writing kubelet configuration to file "/var/lib/kubelet/config.yaml"
[kubelet-start] Starting the kubelet
[control-plane] Using manifest folder "/etc/kubernetes/manifests"
[control-plane] Creating static Pod manifest for "kube-apiserver"
[control-plane] Creating static Pod manifest for "kube-controller-manager"
[control-plane] Creating static Pod manifest for "kube-scheduler"
[etcd] Creating static Pod manifest for local etcd in "/etc/kubernetes/manifests"
[wait-control-plane] Waiting for the kubelet to boot up the control plane as static Pods from directory "/etc/kubernetes/manifests". This can take up to 4m0s
[apiclient] All control plane components are healthy after 14.502196 seconds
[upload-config] Storing the configuration used in ConfigMap "kubeadm-config" in the "kube-system" Namespace
[kubelet] Creating a ConfigMap "kubelet-config" in namespace kube-system with the configuration for the kubelets in the cluster
[upload-certs] Skipping phase. Please see --upload-certs
[mark-control-plane] Marking the node ctrl.srv.world as control-plane by adding the labels: [node-role.kubernetes.io/control-plane node.kubernetes.io/exclude-from-external-load-balancers]
[mark-control-plane] Marking the node ctrl.srv.world as control-plane by adding the taints [node-role.kubernetes.io/control-plane:NoSchedule]
[bootstrap-token] Using token: sx7691.vhnz9i9szyqecy6e
[bootstrap-token] Configuring bootstrap tokens, cluster-info ConfigMap, RBAC Roles
[bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to get nodes
[bootstrap-token] Configured RBAC rules to allow Node Bootstrap tokens to post CSRs in order for nodes to get long term certificate credentials
[bootstrap-token] Configured RBAC rules to allow the csrapprover controller automatically approve CSRs from a Node Bootstrap Token
[bootstrap-token] Configured RBAC rules to allow certificate rotation for all node client certificates in the cluster
[bootstrap-token] Creating the "cluster-info" ConfigMap in the "kube-public" namespace
[kubelet-finalize] Updating "/etc/kubernetes/kubelet.conf" to point to a rotatable kubelet client certificate and key
[addons] Applied essential addon: CoreDNS
[addons] Applied essential addon: kube-proxy
Your Kubernetes control-plane has initialized successfully!
To start using your cluster, you need to run the following as a regular user:
mkdir -p $HOME/.kube
sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
sudo chown $(id -u):$(id -g) $HOME/.kube/config
Alternatively, if you are the root user, you can run:
export KUBECONFIG=/etc/kubernetes/admin.conf
You should now deploy a pod network to the cluster.
Run "kubectl apply -f [podnetwork].yaml" with one of the options listed at:
https://kubernetes.io/docs/concepts/cluster-administration/addons/
You can now join any number of control-plane nodes by copying certificate authorities
and service account keys on each node and then running the following as root:
kubeadm join 10.0.0.25:6443 --token sx7691.vhnz9i9szyqecy6e \
--discovery-token-ca-cert-hash sha256:6166ac8d73379081c2ca2b9625480b3f2cc992f571659e776b68d676e84cc3d9 \
--control-plane
Then you can join any number of worker nodes by running the following on each as root:
# जब वह क्लस्टर में शामिल होता है तो वर्कर नोड पर चलने के लिए नीचे दिया गया कमांड आवश्यक है, इसलिए इसे याद रखें
kubeadm join 10.0.0.25:6443 --token sx7691.vhnz9i9szyqecy6e \
--discovery-token-ca-cert-hash sha256:6166ac8d73379081c2ca2b9625480b3f2cc992f571659e776b68d676e84cc3d9
# क्लस्टर व्यवस्थापक उपयोगकर्ता सेट करें # यदि आप सामान्य उपयोगकर्ता को क्लस्टर व्यवस्थापक के रूप में सेट करते हैं, तो इसके साथ लॉगिन करें और [sudo cp/chown ***] चलाएँ root@ctrl:~# mkdir -p $HOME/.kube root@ctrl:~# cp -i /etc/kubernetes/admin.conf $HOME/.kube/config root@ctrl:~# chown $(id -u):$(id -g) $HOME/.kube/config
|
[3] | Calico के साथ पॉड नेटवर्क कॉन्फ़िगर करें। |
root@ctrl:~# wget https://raw.githubusercontent.com/projectcalico/calico/master/manifests/calico.yaml root@ctrl:~# kubectl apply -f calico.yaml poddisruptionbudget.policy/calico-kube-controllers created serviceaccount/calico-kube-controllers created serviceaccount/calico-node created configmap/calico-config created customresourcedefinition.apiextensions.k8s.io/bgpconfigurations.crd.projectcalico.org created customresourcedefinition.apiextensions.k8s.io/bgppeers.crd.projectcalico.org created customresourcedefinition.apiextensions.k8s.io/blockaffinities.crd.projectcalico.org created customresourcedefinition.apiextensions.k8s.io/caliconodestatuses.crd.projectcalico.org created customresourcedefinition.apiextensions.k8s.io/clusterinformations.crd.projectcalico.org created customresourcedefinition.apiextensions.k8s.io/felixconfigurations.crd.projectcalico.org created customresourcedefinition.apiextensions.k8s.io/globalnetworkpolicies.crd.projectcalico.org created customresourcedefinition.apiextensions.k8s.io/globalnetworksets.crd.projectcalico.org created customresourcedefinition.apiextensions.k8s.io/hostendpoints.crd.projectcalico.org created customresourcedefinition.apiextensions.k8s.io/ipamblocks.crd.projectcalico.org created customresourcedefinition.apiextensions.k8s.io/ipamconfigs.crd.projectcalico.org created customresourcedefinition.apiextensions.k8s.io/ipamhandles.crd.projectcalico.org created customresourcedefinition.apiextensions.k8s.io/ippools.crd.projectcalico.org created customresourcedefinition.apiextensions.k8s.io/ipreservations.crd.projectcalico.org created customresourcedefinition.apiextensions.k8s.io/kubecontrollersconfigurations.crd.projectcalico.org created customresourcedefinition.apiextensions.k8s.io/networkpolicies.crd.projectcalico.org created customresourcedefinition.apiextensions.k8s.io/networksets.crd.projectcalico.org created clusterrole.rbac.authorization.k8s.io/calico-kube-controllers created clusterrole.rbac.authorization.k8s.io/calico-node created clusterrolebinding.rbac.authorization.k8s.io/calico-kube-controllers created clusterrolebinding.rbac.authorization.k8s.io/calico-node created daemonset.apps/calico-node created deployment.apps/calico-kube-controllers created # स्थिति दिखाएँ: ठीक है यदि STATUS = Ready root@ctrl:~# kubectl get nodes NAME STATUS ROLES AGE VERSION ctrl.srv.world Ready control-plane 9m35s v1.25.3 # स्थिति दिखाएं: यदि सभी पॉड्स चल रहे हैं तो ठीक है root@ctrl:~# kubectl get pods -A NAMESPACE NAME READY STATUS RESTARTS AGE kube-system calico-kube-controllers-59697b644f-fgfqp 1/1 Running 0 2m32s kube-system calico-node-z8vgs 1/1 Running 0 2m32s kube-system coredns-565d847f94-v8v2x 1/1 Running 0 10m kube-system coredns-565d847f94-zh4rd 1/1 Running 0 10m kube-system etcd-ctrl.srv.world 1/1 Running 0 11m kube-system kube-apiserver-ctrl.srv.world 1/1 Running 0 11m kube-system kube-controller-manager-ctrl.srv.world 1/1 Running 0 11m kube-system kube-proxy-lnvhj 1/1 Running 0 10m kube-system kube-scheduler-ctrl.srv.world 1/1 Running 0 11m |
Sponsored Link |
|