Windows 2022
Sponsored Link

DHCP Server : Configure DHCP Client2021/12/25
 
Configure DHCP Client. This example is based on Windows 11.
On this example, it shows only the case for IPv4 configuration.
[1] On CUI configuration, Run PowerShell with Admin Privilege and set like follows. 
Windows PowerShell
Copyright (C) Microsoft Corporation. All rights reserved.

# display network interfaces
PS C:\Users\Administrator> Get-NetIPInterface -AddressFamily IPv4 

ifIndex InterfaceAlias                  AddressFamily NlMtu(Bytes) InterfaceMetric Dhcp     ConnectionState PolicyStore
------- --------------                  ------------- ------------ --------------- ----     --------------- -----------
6       Ethernet0                       IPv4                  1500              25 Disabled Connected       ActiveStore
1       Loopback Pseudo-Interface 1     IPv4            4294967295              75 Disabled Connected       ActiveStore

# set DHCP On (replace InterfaceIndex number to your own environment (ifIndex above))
PS C:\Users\Administrator> Set-NetIPInterface -InterfaceIndex 6 -Dhcp Enabled 

# confirm settings
PS C:\Users\Administrator> ipconfig /all 

Windows IP Configuration

   Host Name . . . . . . . . . . . . : RX-0
   Primary Dns Suffix  . . . . . . . :
   Node Type . . . . . . . . . . . . : Hybrid
   IP Routing Enabled. . . . . . . . : No
   WINS Proxy Enabled. . . . . . . . : No
   DNS Suffix Search List. . . . . . : srv.world

Ethernet adapter Ethernet0:

   Connection-specific DNS Suffix  . : srv.world
   Description . . . . . . . . . . . : Intel(R) 82574L Gigabit Network Connection
   Physical Address. . . . . . . . . : 00-0C-29-E5-F5-43
   DHCP Enabled. . . . . . . . . . . : Yes
   Autoconfiguration Enabled . . . . : Yes
   Link-local IPv6 Address . . . . . : fe80::d4fb:211a:70f:b69d%6(Preferred)
   IPv4 Address. . . . . . . . . . . : 10.0.0.250(Preferred)
   Subnet Mask . . . . . . . . . . . : 255.255.255.0
   Lease Obtained. . . . . . . . . . : Thursday, December 23, 2021 10:57:12 PM
   Lease Expires . . . . . . . . . . : Friday, December 31, 2021 10:57:12 PM
   Default Gateway . . . . . . . . . : 10.0.0.1
   DHCP Server . . . . . . . . . . . : 10.0.0.101
   DHCPv6 IAID . . . . . . . . . . . : 100666409
   DHCPv6 Client DUID. . . . . . . . : 00-01-00-01-29-3A-ED-E0-00-0C-29-E5-F5-43
   DNS Servers . . . . . . . . . . . : 10.0.0.10
   NetBIOS over Tcpip. . . . . . . . : Enabled
DHCP Server : Configure DHCP Client (GUI)
 
On GUI configuration, set like follows.
[2] Right-click the Windows button and select [Network connection] and then open the [Ethernet] settings.
[3] Click the [Edit] button on [IP assignment] section and select [Automatic (DHCP)] like follows.
[4] After re-configuration of networking, IP address is assigned from DHCP Server.
Matched Content