Initial Settings : Network Settings2026/04/24

	Change to static IP addres if you use Ubuntu as a server.
[1]	The interface name [enp1s0] is different on each environment, replace it to your own one.

# rename to disable default setting

root@localhost:~#

mv /etc/netplan/00-installer-config.yaml /etc/netplan/00-installer-config.yaml.org

root@localhost:~#

vi /etc/netplan/01-netcfg.yaml

# create new

network:
  # if you use NetworkManager, replace to [renderer: NetworkManager]
  renderer: networkd
  ethernets:
    # interface name
    enp1s0:
      dhcp4: false
      dhcp6: false
      addresses:
      # IP address/subnet mask
      - 10.0.0.30/24
      match:
        # MAC address
        macaddress: 00:0c:29:d8:0b:2a
      nameservers:
        addresses:
        # name server to bind
        # to set multiple servers, specify each item on a separate line
        - 10.0.0.10
        - 10.0.0.11
        search:
        # DNS search base
        # to set multiple domains, specify each item on a separate line
        - srv.world
        - server.education
      routes:
      # default gateway
      # [metric] : set priority (specify it if multiple NICs are set)
      # lower value is higher priority
      - to: default
        via: 10.0.0.1
        metric: 100
      set-name: enp1s0
  version: 2

# apply changes

root@localhost:~#

chmod 600 /etc/netplan/01-netcfg.yaml

root@localhost:~#

netplan apply

root@localhost:~#

ip address show

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host noprefixroute
       valid_lft forever preferred_lft forever
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 52:54:00:8a:0e:9d brd ff:ff:ff:ff:ff:ff
    altname enx5254008a0e9d
    inet 10.0.0.30/24 brd 10.0.0.255 scope global enp1s0
       valid_lft forever preferred_lft forever
    inet6 fe80::5054:ff:fe8a:e9d/64 scope link proto kernel_ll
       valid_lft forever preferred_lft forever

[2]	If you don't need IPv6, it's possible to disable it like follows.

root@localhost:~#

echo "net.ipv6.conf.all.disable_ipv6 = 1" >> /etc/sysctl.d/ipv6.conf

root@localhost:~#

sysctl --system

root@localhost:~#

ip address show

1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
    link/ether 52:54:00:8a:0e:9d brd ff:ff:ff:ff:ff:ff
    altname enx5254008a0e9d
    inet 10.0.0.30/24 brd 10.0.0.255 scope global enp1s0
       valid_lft forever preferred_lft forever

Matched Content