KVM : Install2021/05/10 |
|
This is the Virtualization Configuration with KVM ( Kernel-based Virtual Machine ) + QEMU.
This requires that the CPU on your computer which has a feature Intel VT or AMD-V. |
|
| [1] | Install required packages. |
|
root@dlp:~# apt -y install qemu-kvm libvirt-daemon-system libvirt-daemon virtinst bridge-utils libosinfo-bin
|
| [2] | Configure Bridge networking. |
|
root@dlp:~#
vi /etc/netplan/01-netcfg.yaml
network:
ethernets:
enp1s0:
dhcp4: no
# disable existing configuration for ethernet
#addresses: [10.0.0.30/24]
#gateway4: 10.0.0.1
#nameservers:
#addresses: [10.0.0.10]
dhcp6: no
# add configuration for bridge interface
bridges:
br0:
interfaces: [enp1s0]
dhcp4: no
addresses: [10.0.0.30/24]
gateway4: 10.0.0.1
nameservers:
addresses: [10.0.0.10]
parameters:
stp: false
dhcp6: no
version: 2
root@dlp:~#
root@dlp:~# netplan apply
ip addr
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
2: enp1s0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel master br0 state UP group default qlen 1000
link/ether 52:54:00:ac:5b:90 brd ff:ff:ff:ff:ff:ff
3: br0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP group default qlen 1000
link/ether 16:2c:34:d4:59:46 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.30/24 brd 10.0.0.255 scope global br0
valid_lft forever preferred_lft forever
inet6 fe80::142c:34ff:fed4:5946/64 scope link
valid_lft forever preferred_lft forever
4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default qlen 1000
link/ether 52:54:00:ae:04:d6 brd ff:ff:ff:ff:ff:ff
inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0
valid_lft forever preferred_lft forever
|
| Sponsored Link |
|
|