GlusterFS : Replication Setting2018/06/22 |
|
Configure GlusterFS Storage Cluster.
For example, create a Replication volume with 2 servers.
This example shows to use 2 servers but it's possible to use more than 3 servers.
|
+----------------------+ | +----------------------+
| [GlusterFS Server#1] |10.0.0.51 | 10.0.0.52| [GlusterFS Server#2] |
| node01.srv.world +----------+----------+ node02.srv.world |
| | | |
+----------------------+ +----------------------+
|
|
It is recommended to use partitions for GlusterFS volumes which are different from the / partition.
The environment on this example is set as that [sdb1] is mounted on [/glusterfs] directory for GlusterFS Configuration on all Nodes. |
|
| [1] | |
| [2] | Create a Directory for GlusterFS Volume on all Nodes. |
|
root@node01:~# mkdir /glusterfs/replica |
| [3] | Configure Clustering like follows on a node. (it's OK on any node) |
|
# probe the node root@node01:~# gluster peer probe node02 peer probe: success. # show status root@node01:~# gluster peer status Number of Peers: 1 Hostname: node02 Uuid: aac88f72-3cf6-4bf8-a9d5-4347d7a8040c State: Peer in Cluster (Connected) # create volume root@node01:~# gluster volume create vol_replica replica 2 transport tcp \ node01:/glusterfs/replica \ node02:/glusterfs/replica volume create: vol_replica: success: please start the volume to access data # start volume root@node01:~# gluster volume start vol_replica volume start: vol_replica: success # show volume info root@node01:~# gluster volume info Volume Name: vol_replica Type: Replicate Volume ID: 0762bcea-1149-40e4-83b9-ed8513605153 Status: Started Snapshot Count: 0 Number of Bricks: 1 x 2 = 2 Transport-type: tcp Bricks: Brick1: node01:/glusterfs/replica Brick2: node02:/glusterfs/replica Options Reconfigured: transport.address-family: inet nfs.disable: on performance.client-io-threads: off |
| [4] |
| Sponsored Link |
|
|