OpenStack Pike : Configure Neutron#5 (Compute Node)2017/09/13 |
|
Configure OpenStack Network Service (Neutron).
This example is not All in One Settings like here,
but Configure the 3 Nodes environment like follows.
Neutron needs a plugin software, it's possible to choose it from some softwares. This example chooses ML2 plugin.
( it uses LinuxBridge under the backend )
------------+---------------------------+---------------------------+------------
| | |
eth0|10.0.0.30 eth0|10.0.0.50 eth0|10.0.0.51
+-----------+-----------+ +-----------+-----------+ +-----------+-----------+
| [ Control Node ] | | [ Network Node ] | | [ Compute Node ] |
| | | | | |
| MariaDB RabbitMQ | | L2 Agent | | Libvirt |
| Memcached httpd | | L3 Agent | | Nova Compute |
| Keystone Glance | | Metadata Agent | | L2 Agent |
| Nova API | | | | |
| Neutron Server | | | | |
| Metadata Agent | | | | |
+-----------------------+ +-----------------------+ +-----------------------+
|
| [1] | Install required packages on Compute Node. |
|
root@node01:~# apt-get -y install neutron-common neutron-plugin-ml2 neutron-plugin-linuxbridge-agent
|
| [2] | Configure Compute Node. |
|
root@node01:~# mv /etc/neutron/neutron.conf /etc/neutron/neutron.conf.org
root@node01:~#
vi /etc/neutron/neutron.conf # create new [DEFAULT] core_plugin = ml2 service_plugins = router auth_strategy = keystone state_path = /var/lib/neutron allow_overlapping_ips = True # RabbitMQ connection info transport_url = rabbit://openstack:password@10.0.0.30 [agent] root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf # Keystone auth info [keystone_authtoken] auth_uri = http://10.0.0.30:5000 auth_url = http://10.0.0.30:35357 memcached_servers = 10.0.0.30:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = neutron password = servicepassword [oslo_concurrency] lock_path = $state_path/lock chmod 640 /etc/neutron/neutron.conf root@node01:~# chgrp neutron /etc/neutron/neutron.conf
root@node01:~#
vi /etc/neutron/plugins/ml2/ml2_conf.ini # line 114: add ( it's OK with no value for "tenant_network_types" (set later if need) ) [ml2]
type_drivers = flat,vlan,vxlan
tenant_network_types = mechanism_drivers = linuxbridge,l2population extension_drivers = port_security # line 247: uncomment and add enable_security_group = True firewall_driver = neutron.agent.linux.iptables_firewall.IptablesFirewallDriver
# end line: uncomment enable_ipset = True ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini
root@node01:~#
vi /etc/nova/nova.conf # add follows into [DEFAULT] section
use_neutron = True
linuxnet_interface_driver = nova.network.linux_net.LinuxBridgeInterfaceDriver firewall_driver = nova.virt.firewall.NoopFirewallDriver vif_plugging_is_fatal = True vif_plugging_timeout = 300 # add follows to the end: Neutron auth info # the value of metadata_proxy_shared_secret is the same with the one in metadata_agent.ini
[neutron]
url = http://10.0.0.30:9696 auth_url = http://10.0.0.30:35357 auth_type = password project_domain_name = default user_domain_name = default region_name = RegionOne project_name = service username = neutron password = servicepassword service_metadata_proxy = True metadata_proxy_shared_secret = metadata_secret
root@node01:~#
vi /etc/neutron/plugins/ml2/linuxbridge_agent.ini # line 197: set own IP address local_ip = 10.0.0.51 systemctl restart nova-compute neutron-linuxbridge-agent root@node01:~# systemctl enable neutron-linuxbridge-agent |
| Sponsored Link |
|
|