Ubuntu 16.04
Sponsored Link

GlusterFS : Striping + Replication2016/06/05

 
Configure Storage Clustering.
For example, create a Striping + Replication volume with 4 servers.
                                  |
+----------------------+          |          +----------------------+
| [GlusterFS Server#1] |10.0.0.51 | 10.0.0.52| [GlusterFS Server#2] |
|   node01.srv.world   +----------+----------+   node02.srv.world   |
|                      |          |          |                      |
+----------------------+          |          +----------------------+
                                  |
+----------------------+          |          +----------------------+
| [GlusterFS Server#3] |10.0.0.53 | 10.0.0.54| [GlusterFS Server#4] |
|   node03.srv.world   +----------+----------+   node04.srv.world   |
|                      |                     |                      |
+----------------------+                     +----------------------+

 
It is recommended to use partitions for GlusterFS volumes which are different from the / partition.
The environment on this example is set as that sdb1 is mounted on /glusterfs directory for GlusterFS Configuration on all Nodes.
[1]
[2] Create a Directory for GlusterFS Volume on all Nodes.
root@node01:~#
mkdir /glusterfs/strip-replica

[3] Configure Clustering like follows on a node. (it's OK on any node)
# probe the node

root@node01:~#
gluster peer probe node02

peer probe: success.
root@node01:~#
gluster peer probe node03

peer probe: success.
root@node01:~#
gluster peer probe node04

peer probe: success.
# show status

root@node01:~#
gluster peer status

Number of Peers: 3

Hostname: node02
Uuid: e8a3bcde-013e-4910-bbe6-0ce70d2e8feb
State: Peer in Cluster (Connected)

Hostname: node03
Uuid: 4df6790e-0fb6-4f25-95f6-ce60869f0842
State: Peer in Cluster (Connected)

Hostname: node04
Uuid: d5594100-6599-4ffc-891c-c60d8c121b5a
State: Peer in Cluster (Connected)

# create volume

root@node01:~#
gluster volume create vol_strip-replica stripe 2 replica 2 transport tcp \
node01:/glusterfs/strip-replica \
node02:/glusterfs/strip-replica \
node03:/glusterfs/strip-replica \
node04:/glusterfs/strip-replica

volume create: vol_strip-replica: success: please start the volume to access data
# start volume

root@node01:~#
gluster volume start vol_strip-replica

volume start: vol_strip-replica: success
# show volume info

root@node01:~#
gluster volume info


Volume Name: vol_strip-replica
Type: Striped-Replicate
Volume ID: 813fffe4-c36b-4c1a-96d3-94e5a6560d76
Status: Started
Number of Bricks: 1 x 2 x 2 = 4
Transport-type: tcp
Bricks:
Brick1: node01:/glusterfs/strip-replica
Brick2: node02:/glusterfs/strip-replica
Brick3: node03:/glusterfs/strip-replica
Brick4: node04:/glusterfs/strip-replica
Options Reconfigured:
performance.readdir-ahead: on
[4]
Matched Content