SLES 15
Sponsored Link

GlusterFS : Distributed Setting
2019/01/17
 
Configure GlusterFS Storage Cluster.
For example, create a distributed volume with 2 servers.
This example shows to use 2 servers but it's possible to use more than 3 servers.
                                  |
+----------------------+          |          +----------------------+
| [GlusterFS Server#1] |10.0.0.51 | 10.0.0.52| [GlusterFS Server#2] |
|   node01.srv.world   +----------+----------+   node02.srv.world   |
|                      |                     |                      |
+----------------------+                     +----------------------+

 
It is recommended to use partitions for GlusterFS volumes which are different from the / partition.
The environment on this example is set as that [sdb1] is mounted on [/glusterfs] directory for GlusterFS Configuration on all Nodes.
[1]
[2] Create a Directory for GlusterFS Volume on all Nodes.
node01:~ #
mkdir -p /glusterfs/distributed

[3] Configure Clustering like follows on a node. (it's OK on any node)
# probe the node

node01:~ #
gluster peer probe node02

peer probe: success.
# show status

node01:~ #
gluster peer status

Number of Peers: 1

Hostname: node02
Uuid: fa0c1a0c-9738-4554-8ac8-cd84f1de72af
State: Peer in Cluster (Connected)

# create volume

node01:~ #
gluster volume create vol_distributed transport tcp \
node01:/glusterfs/distributed \
node02:/glusterfs/distributed

volume create: vol_distributed: success: please start the volume to access data
# start volume

node01:~ #
gluster volume start vol_distributed

volume start: vol_distributed: success
# show volume info

node01:~ #
gluster volume info


Volume Name: vol_distributed
Type: Distribute
Volume ID: ec7c7287-5fb6-4482-b51a-9e75b01cc759
Status: Started
Snapshot Count: 0
Number of Bricks: 2
Transport-type: tcp
Bricks:
Brick1: node01:/glusterfs/distributed
Brick2: node02:/glusterfs/distributed
Options Reconfigured:
transport.address-family: inet
nfs.disable: on
[4]
Matched Content
 
Tweet