SLES 15
Sponsored Link

Configure DHCP Client : SUSE2019/01/17

 
Configure DHCP Client. DHCP Client uses 68/UDP.
[1] For SUSE Clients, Configure like follows.
dlp:~ #
vi /etc/sysconfig/network/ifcfg-eth0
# change

BOOTPROTO='
dhcp
'
# change to empty all below

BROADCAST=''
IPADDR=''
NETMASK=''
NETWORK=''
dlp:~ #
vi /etc/sysconfig/network/routes
# comment out active entry

#
default 10.0.0.1 - eth0
dlp:~ #
systemctl restart wickedd wickedd-dhcp4 wicked
Configure DHCP Client : Windows
 
It's the example for configuring Windows 10 Client.
[2] Open the network settings and select [internet protocol] and click [property] button.
[3] Check boxes like below, then IP address is re-configured automatically.
[4] See the network status. Automatical configuration is done.
Matched Content