RabbitMQ : Configure Cluster2024/09/17 |
Configure RabbitMQ Cluster. |
|
[1] |
Install and start RabbitMQ Server on all Nodes, refer to here. |
[2] | Configure clustering on a Node. |
# put the same cookie on all nodes root@node02:~ # service rabbitmq stop Stopping rabbitmq. root@node02:~ # ssh node01.srv.world 'cat /var/db/rabbitmq/.erlang.cookie' > /var/db/rabbitmq/.erlang.cookie root@node02:~ # service rabbitmq start Starting rabbitmq. # stop application and reset root@node02:~ # rabbitmqctl stop_app Stopping rabbit application on node rabbit@node02 ... root@node02:~ # rabbitmqctl reset Resetting node rabbit@node02 ... # join in cluster # specify only hostname, not with FQDN root@node02:~ # rabbitmqctl join_cluster rabbit@node01 Clustering node rabbit@node02 with rabbit@node01 # start application root@node02:~ # rabbitmqctl start_app Starting node rabbit@node02 ... # show status root@node02:~ # rabbitmqctl cluster_status Cluster status of node rabbit@node02 ... Basics Cluster name: rabbit@node02.srv.world Total CPU cores available cluster-wide: 4 Disk Nodes rabbit@node01 rabbit@node02 Running Nodes rabbit@node01 rabbit@node02 Versions rabbit@node02: RabbitMQ 3.13.7 on Erlang 26.2.5.1 rabbit@node01: RabbitMQ 3.13.7 on Erlang 26.2.5.1 CPU Cores Node: rabbit@node02, available CPU cores: 2 Node: rabbit@node01, available CPU cores: 2 Maintenance status Node: rabbit@node02, status: not under maintenance Node: rabbit@node01, status: not under maintenance Alarms (none) Network Partitions (none) Listeners Node: rabbit@node02, interface: [::], port: 25672, protocol: clustering, purpose: inter-node and CLI tool communication Node: rabbit@node02, interface: [::], port: 5672, protocol: amqp, purpose: AMQP 0-9-1 and AMQP 1.0 Node: rabbit@node02, interface: 0.0.0.0, port: 5672, protocol: amqp, purpose: AMQP 0-9-1 and AMQP 1.0 Node: rabbit@node01, interface: [::], port: 25672, protocol: clustering, purpose: inter-node and CLI tool communication Node: rabbit@node01, interface: [::], port: 5672, protocol: amqp, purpose: AMQP 0-9-1 and AMQP 1.0 Node: rabbit@node01, interface: 0.0.0.0, port: 5672, protocol: amqp, purpose: AMQP 0-9-1 and AMQP 1.0 Feature flags Flag: classic_mirrored_queue_version, state: enabled Flag: classic_queue_type_delivery_support, state: enabled Flag: direct_exchange_routing_v2, state: enabled Flag: feature_flags_v2, state: enabled Flag: implicit_default_bindings, state: enabled Flag: khepri_db, state: disabled Flag: listener_records_in_ets, state: enabled Flag: maintenance_mode_status, state: enabled Flag: message_containers, state: enabled Flag: message_containers_deaths_v2, state: enabled Flag: quorum_queue, state: enabled Flag: quorum_queue_non_voters, state: enabled Flag: restart_streams, state: enabled Flag: stream_filtering, state: enabled Flag: stream_queue, state: enabled Flag: stream_sac_coordinator_unblock_group, state: enabled Flag: stream_single_active_consumer, state: enabled Flag: stream_update_config_command, state: enabled Flag: tracking_records_in_ets, state: enabled Flag: user_limits, state: enabled Flag: virtual_host_metadata, state: enabled |
[3] | Configure Queue sync setting. If [rabbitmqadmin] command is not found, install it, refer to here. This example shows to configure that Queue is synced on all Nodes. There are some modes to sync among Nodes, refer details to official site below. ⇒ https://www.rabbitmq.com/ha.html |
# add Queue for sync root@node01:~ # rabbitmqadmin declare queue name=shared_queue queue declared # set sync policy # rabbitmqctl set_policy [policy name(any name you like)] [Queue] [Mode] root@node01:~ # rabbitmqctl set_policy ha-policy "shared_queue" '{"ha-mode":"all"}' Setting policy "ha-policy" for pattern "shared_queue" to "{"ha-mode":"all"}" with priority "0" for vhost "/" ... # show status root@node01:~ # rabbitmqadmin list queues name node policy slave_nodes state synchronised_slave_nodes +--------------+---------------+-----------+---------------+---------+--------------------------+ | name | node | policy | slave_nodes | state | synchronised_slave_nodes | +--------------+---------------+-----------+---------------+---------+--------------------------+ | shared_queue | rabbit@node01 | ha-policy | rabbit@node02 | running | rabbit@node02 | +--------------+---------------+-----------+---------------+---------+--------------------------+ |
[4] | To Enable management Plugin on all Nodes, it's possible to see each Node's status like follows. |
Sponsored Link |
|