GlusterFS 7 : GlusterFS + NFS-Ganesha2020/05/05 |
|
Install NFS-Ganesha and integrate with GlusterFS to mount Gluster Volume with NFS protocol.
The supported NFS protocols by NFS-Ganesha are v3, v4.0, v4.1, pNFS.
For example, Configure NFS Export setting to a Gluster Volume [vol_distributed] like an example of the link here.
|
|
| [1] | Disable NFS feature in Gluster first. The NFS feature in Gluster is officially deprecated. Also if NFS server is running, stop and disable it, too. |
|
# OK if [nfs.disable: on] (default setting) [root@node01 ~]# gluster volume get vol_distributed nfs.disable Option Value ------ ----- nfs.disable on # if [nfs.disable: off], turn to disable [root@node01 ~]# gluster volume set vol_distributed nfs.disable on volume set: success # if NFS server is running, disable it [root@node01 ~]# systemctl disable --now nfs-server |
| [2] | Install and Configure NFS-Ganesha on a Node in GlusterFS Cluster. |
|
[root@node01 ~]#
[root@node01 ~]# dnf -y install nfs-ganesha-gluster mv /etc/ganesha/ganesha.conf /etc/ganesha/ganesha.conf.org
[root@node01 ~]#
vi /etc/ganesha/ganesha.conf # create new
NFS_CORE_PARAM {
# possible to mount with NFSv3 to NFSv4 Pseudo path
mount_path_pseudo = true;
# NFS protocol
Protocols = 3,4;
}
EXPORT_DEFAULTS {
# default access mode
Access_Type = RW;
}
EXPORT {
# uniq ID
Export_Id = 101;
# mount path of Gluster Volume
Path = "/vol_distributed";
FSAL {
# any name
name = GLUSTER;
# hostname or IP address of this Node
hostname="10.0.0.51";
# Gluster volume name
volume="vol_distributed";
}
# config for root Squash
Squash="No_root_squash";
# NFSv4 Pseudo path
Pseudo="/vfs_distributed";
# allowed security options
SecType = "sys";
}
LOG {
# default log level
Default_Log_Level = WARN;
}
[root@node01 ~]#
systemctl enable --now nfs-ganesha
# verify mount [root@node01 ~]# showmount -e localhost Export list for localhost: /vfs_distributed (everyone) |
| [3] | If Firewalld is running, allow NFS service. |
|
[root@node01 ~]# firewall-cmd --add-service=nfs --permanent success [root@node01 ~]# firewall-cmd --reload success |
| [4] | Verify NFS mounting on a Client Host. |
|
[root@client ~]#
dnf -y install nfs-utils # specify Pseudo path set on [Pseudo=***] in ganesha.conf [root@client ~]# mount -t nfs4 node01.srv.world:/vfs_distributed /mnt [root@client ~]# df -hT Filesystem Type Size Used Avail Use% Mounted on devtmpfs devtmpfs 1.9G 0 1.9G 0% /dev tmpfs tmpfs 1.9G 0 1.9G 0% /dev/shm tmpfs tmpfs 1.9G 8.6M 1.9G 1% /run tmpfs tmpfs 1.9G 0 1.9G 0% /sys/fs/cgroup /dev/mapper/cl-root xfs 26G 1.7G 25G 7% / /dev/vda1 ext4 976M 256M 654M 29% /boot tmpfs tmpfs 379M 0 379M 0% /run/user/0 node01.srv.world:/vfs_distributed nfs4 30G 4.0G 26G 14% /mnt |
| Sponsored Link |
|
|