Install KVM + QEMU2009/06/13 |
| It's the Virtualization settings with KVM ( Kernel-based Virtual Machine ) + QEMU.
This requires that the CPU on your computer has a function Intel VT or AMD-V. |
|
| [1] | Install KVM. |
|
[root@dlp ~]# yum -y install qemu-kvm qemu bridge-utils [root@dlp ~]# modprobe kvm [root@dlp ~]# modprobe kvm_intel # if AMD, "kvm_amd" [root@dlp ~]# kvm_intel 47768 0 kvm 152904 1 kvm_intel
|
| [2] | Configure Bridge networking. |
|
[root@dlp ~]# cd /etc/sysconfig/network-scripts [root@dlp network-scripts]# cp ifcfg-eth0 ifcfg-br0 [root@dlp network-scripts]# vi ifcfg-br0 DEVICE= br0 # change HWADDR=00:24:1D:13:7A:26 ONBOOT=yes IPADDR=192.168.0.20 BOOTPROTO=none NETMASK=255.255.255.0 TYPE= Bridge # change GATEWAY=192.168.0.1 DNS1=192.168.0.10 IPV6INIT=no USERCTL=no PREFIX=24 NAME="System eth0" UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03 [root@ns network-scripts]# vi ifcfg-eth0 DEVICE=eth0 HWADDR=00:24:1D:13:7A:26 ONBOOT=yes IPADDR=192.168.0.20 BOOTPROTO=none NETMASK=255.255.255.0 TYPE=Ethernet GATEWAY=192.168.0.1 DNS1=192.168.0.10 IPV6INIT=no USERCTL=no PREFIX=24 NAME="System eth0" UUID=5fb06bd0-0bb0-7ffb-45f1-d6edd65f3e03 BRIDGE=br0 # add [root@dlp network-scripts]# [root@dlp ~]# /etc/rc.d/init.d/network restart Shutting down interface eth0: [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface br0: [ OK ]
|
| Sponsored Link |
|
|