Configure iSCSI Target(tgt)2017/06/21 |
Configure Storage Server with iSCSI.
This is the example of configuring iSCSI Target with tgt.
|
[1] | Install administration tools first. |
root@dlp:~# apt -y install tgt dkms
|
[2] | Configure iSCSI Target. For example, create a disk image under the [/var/lib/iscsi_disks] directory and set it as a shared disk. |
# create a disk image root@dlp:~# mkdir /var/lib/iscsi_disks root@dlp:~# dd if=/dev/zero of=/var/lib/iscsi_disks/disk01.img count=0 bs=1 seek=10G
root@dlp:~#
vi /etc/tgt/conf.d/target01.conf # create new # naming rule : [ iqn.yaer-month.domain:any name ] <target iqn.2017-06.world.srv:target01> # provided devicce as a iSCSI target backing-store /var/lib/iscsi_disks/disk01.img # iSCSI Initiator's IP address you allow to connect initiator-address 10.0.0.31 # authentication info ( set anyone you like for "username", "password" ) incominguser username password </target>
root@dlp:~#
systemctl restart tgt
# show status root@dlp:~# tgtadm --mode target --op show Target 1: iqn.2017-06.world.srv:target01 System information: Driver: iscsi State: ready I_T nexus information: LUN information: LUN: 0 Type: controller SCSI ID: IET 00010000 SCSI SN: beaf10 Size: 0 MB, Block size: 1 Online: Yes Removable media: No Prevent removal: No Readonly: No SWP: No Thin-provisioning: No Backing store type: null Backing store path: None Backing store flags: LUN: 1 Type: disk SCSI ID: IET 00010001 SCSI SN: beaf11 Size: 10737 MB, Block size: 512 Online: Yes Removable media: No Prevent removal: No Readonly: No SWP: No Thin-provisioning: No Backing store type: rdwr Backing store path: /var/lib/iscsi_disks/disk01.img Backing store flags: Account information: username ACL information: 10.0.0.31 |
Sponsored Link |
|