Networking2013/05/06 |
[1] | Change to static IP addres if you use Debian as a server. |
root@dlp:~#
vi /etc/network/interfaces
# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo iface lo inet loopback
# The primary network interface
root@dlp:~# auto eth0 # make it comment # iface eth0 inet dhcp# add follows iface eth0 inet static
address 10.0.0.30 # specify IP address network 10.0.0.0 # specify network address netmask 255.255.255.0 # specify subnet-mask broadcast 10.0.0.255 # specify broadcast address gateway 10.0.0.1 # specify default gateway dns-nameservers 10.0.0.10 # specify name server ifdown eth0 && ifup eth0 |
[2] | Disable IPv6 if not needed. |
root@dlp:~# echo "net.ipv6.conf.all.disable_ipv6 = 1" >> /etc/sysctl.conf root@dlp:~# sysctl -p net.ipv6.conf.all.disable_ipv6 = 1 root@dlp:~# eth0 Link encap:Ethernet HWaddr 00:0c:29:48:32:ff inet addr:10.0.0.30 Bcast:10.0.0.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:1395 errors:0 dropped:0 overruns:0 frame:0 TX packets:1109 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:131131 (128.0 KiB) TX bytes:148632 (145.1 KiB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:3 errors:0 dropped:0 overruns:0 frame:0 TX packets:3 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:376 (376.0 B) TX bytes:376 (376.0 B) |
Sponsored Link |
|