Debian 11 Bullseye
Sponsored Link

OpenStack Victoria : Configure Neutron (Compute Node)2021/08/31

 
Configure OpenStack Network Service (Neutron).
This example is not All in One Settings like here, but Configure the 3 Nodes environment like follows.
Neutron needs a plugin software, it's possible to choose it from some softwares.
This example chooses ML2 plugin. ( it uses LinuxBridge under the backend )
------------+---------------------------+---------------------------+------------
            |                           |                           |
        eth0|10.0.0.30              eth0|10.0.0.50              eth0|10.0.0.51
+-----------+-----------+   +-----------+-----------+   +-----------+-----------+
|    [ Control Node ]   |   |    [ Network Node ]   |   |    [ Compute Node ]   |
|                       |   |                       |   |                       |
|  MariaDB    RabbitMQ  |   |        L2 Agent       |   |        Libvirt        |
|  Memcached  httpd     |   |        L3 Agent       |   |     Nova Compute      |
|  Keystone   Glance    |   |     Metadata Agent    |   |        L2 Agent       |
|  Nova API             |   |                       |   |                       |
|  Neutron Server       |   |                       |   |                       |
|  Metadata Agent       |   |                       |   |                       |
+-----------------------+   +-----------------------+   +-----------------------+

[1] Install Neutron services on Compute Node. For questions duruing the installation, it's OK with [No] to all.
root@node01:~#
apt -y install neutron-common neutron-plugin-ml2 neutron-linuxbridge-agent
[2] Configure Compute Node.
root@node01:~#
mv /etc/neutron/neutron.conf /etc/neutron/neutron.conf.org

root@node01:~#
vi /etc/neutron/neutron.conf
# create new

[DEFAULT]
core_plugin = ml2
service_plugins = router
auth_strategy = keystone
state_path = /var/lib/neutron
allow_overlapping_ips = True
# RabbitMQ connection info
transport_url = rabbit://openstack:password@10.0.0.30

[agent]
root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf

# Keystone auth info
[keystone_authtoken]
www_authenticate_uri = http://10.0.0.30:5000
auth_url = http://10.0.0.30:5000
memcached_servers = 10.0.0.30:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = neutron
password = servicepassword

[oslo_concurrency]
lock_path = $state_path/lock

root@node01:~#
chmod 640 /etc/neutron/neutron.conf

root@node01:~#
chgrp neutron /etc/neutron/neutron.conf

root@node01:~#
vi /etc/neutron/plugins/ml2/ml2_conf.ini
# line 142 : change

mechanism_drivers =
linuxbridge
root@node01:~#
vi /etc/neutron/plugins/ml2/linuxbridge_agent.ini
# line 195 : add

[securitygroup]
enable_security_group = True
firewall_driver = iptables
enable_ipset = True
# line 245 : add to set own IP address

local_ip = 10.0.0.51
root@node01:~#
vi /etc/nova/nova.conf
# add follows into [DEFAULT] section

use_neutron = True
vif_plugging_is_fatal = True
vif_plugging_timeout = 300
# add follows to the end: Neutron auth info
# the value of [metadata_proxy_shared_secret] is the same with the one in [metadata_agent.ini]

[neutron]
auth_url = http://10.0.0.30:5000
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = neutron
password = servicepassword
service_metadata_proxy = True
metadata_proxy_shared_secret = metadata_secret
root@node01:~#
ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini

root@node01:~#
systemctl restart nova-compute neutron-linuxbridge-agent

root@node01:~#
systemctl enable neutron-linuxbridge-agent

Matched Content