OpenStack Rocky : Configure Neutron#5 (Compute Node)2019/08/20 |
|
Configure OpenStack Network Service (Neutron).
This example is not All in One Settings like here,
but Configure the 3 Nodes environment like follows. Neutron needs a plugin software,
it's possible to choose it from some softwares. This example chooses ML2 plugin. ( it uses Open vSwitch under the backend )
------------+---------------------------+---------------------------+------------
| | |
eth0|10.0.0.30 eth0|10.0.0.50 eth0|10.0.0.51
+-----------+-----------+ +-----------+-----------+ +-----------+-----------+
| [ Control Node ] | | [ Network Node ] | | [ Compute Node ] |
| | | | | |
| MariaDB RabbitMQ | | L2 Agent | | Libvirt |
| Memcached httpd | | L3 Agent | | Nova Compute |
| Keystone Glance | | Metadata Agent | | L2 Agent |
| Nova API | | Open vSwitch | | Open vSwitch |
| Neutron Server | | | | |
| Metadata Agent | | | | |
+-----------------------+ +-----------------------+ +-----------------------+
|
| [1] | Install required packages on Compute Node. For questions during installation, it's OK to answer with [No] or input any value to them, Configure all with manualy below. |
|
root@node01:~# apt -y install neutron-common neutron-plugin-ml2 neutron-openvswitch-agent
|
| [2] | Configure Compute Node. |
|
root@node01:~# mv /etc/neutron/neutron.conf /etc/neutron/neutron.conf.org
root@node01:~#
vi /etc/neutron/neutron.conf # create new [DEFAULT] core_plugin = ml2 service_plugins = router auth_strategy = keystone state_path = /var/lib/neutron allow_overlapping_ips = True # RabbitMQ connection info transport_url = rabbit://openstack:password@10.0.0.30 [agent] root_helper = sudo /usr/bin/neutron-rootwrap /etc/neutron/rootwrap.conf # Keystone auth info [keystone_authtoken] www_authenticate_uri = http://10.0.0.30:5000 auth_url = http://10.0.0.30:5000 memcached_servers = 10.0.0.30:11211 auth_type = password project_domain_name = default user_domain_name = default project_name = service username = neutron password = servicepassword [oslo_concurrency] lock_path = $state_path/lock chmod 640 /etc/neutron/neutron.conf root@node01:~# chgrp neutron /etc/neutron/neutron.conf
root@node01:~#
vi /etc/neutron/plugins/ml2/ml2_conf.ini # line 107: add ( it's OK with no value for [tenant_network_types] (set later if need) ) # (if existing the same name parameters, comment out them first) [ml2]
type_drivers = flat,vlan,vxlan
tenant_network_types = mechanism_drivers = openvswitch extension_drivers = port_security
root@node01:~#
vi /etc/neutron/plugins/ml2/openvswitch_agent.ini # line 109: comment out # tunnel_types = vxlan
# line 188: change to own IP address local_ip = 10.0.0.51
# line 195: comment out # bridge_mappings = external:br-ex
# line 260: confirm settings [securitygroup] firewall_driver = openvswitch enable_security_group = True enable_ipset = True
root@node01:~#
vi /etc/nova/nova.conf # add follows into [DEFAULT] section
use_neutron = True
linuxnet_interface_driver = nova.network.linux_net.LinuxOVSInterfaceDriver firewall_driver = nova.virt.firewall.NoopFirewallDriver vif_plugging_is_fatal = True vif_plugging_timeout = 300 # add follows to the end: Neutron auth info # the value of metadata_proxy_shared_secret is the same with the one in metadata_agent.ini
[neutron]
auth_url = http://10.0.0.30:5000 auth_type = password project_domain_name = default user_domain_name = default region_name = RegionOne project_name = service username = neutron password = servicepassword service_metadata_proxy = True metadata_proxy_shared_secret = metadata_secret ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini root@node01:~# systemctl restart nova-compute neutron-openvswitch-agent root@node01:~# systemctl enable neutron-openvswitch-agent |
| Sponsored Link |
|
|