DHCP : Configure DHCP Server2019/07/16 |
Configure DHCP ( Dynamic Host Configuration Protocol ) Server. DHCP Server uses 67/UDP.
|
|
[1] | Install and configure DHCP Server. |
root@dlp:~#
apt -y install isc-dhcp-server
root@dlp:~#
vi /etc/default/isc-dhcp-server # line 4: uncomment DHCPDv4_CONF=/etc/dhcp/dhcpd.conf # line 17,18: specify interface to listen (replace the IF name to your environment) # if not use IPv6, comment out the line INTERFACESv4=" ens2 "INTERFACESv6=" ens2 "
root@dlp:~#
vi /etc/dhcp/dhcpd.conf # line 7: specify domain name option domain-name "srv.world" ;
# line 8: specify nameserver's hostname or IP address option domain-name-servers dlp.srv.world ;
# line 21: uncomment authoritative; # add to the end # specify network address and subnet-mask subnet 10.0.0.0 netmask 255.255.255.0 { # specify default gateway option routers 10.0.0.1; # specify subnet-mask option subnet-mask 255.255.255.0; # specify the range of leased IP address range dynamic-bootp 10.0.0.200 10.0.0.254; } systemctl restart isc-dhcp-server |
Sponsored Link |
|