GlusterFS 7 : Add Nodes (Bricks)2020/03/30 |
|
Add Nodes (Bricks) to existing Cluster.
For example, Add a Node [node03] to the existing Cluster like follows.
|
+----------------------+ | +----------------------+
| [GlusterFS Server#1] |10.0.0.51 | 10.0.0.52| [GlusterFS Server#2] |
| node01.srv.world +----------+----------+ node02.srv.world |
| | | | |
+----------------------+ | +----------------------+
⇑ | ⇑
file1, file3 ... | file2, file4 ...
|
+----------------------+ |
| [GlusterFS Server#3] |10.0.0.53 |
| node03.srv.world +----------+
| |
+----------------------+
|
| [1] |
Install GlusterFS to a New Node, refer to here,
and then Create a directory for GlusterFS volume on the same Path with other Nodes.
|
| [2] | Add a New Node to existing Cluster on a node. (OK on any existing node) |
|
# probe new node [root@node01 ~]# gluster peer probe node03 peer probe: success. # confirm status [root@node01 ~]# gluster peer status Number of Peers: 2 Hostname: node02 Uuid: f1c4ce91-1b08-45f7-84e7-6549a85071fd State: Peer in Cluster (Connected) Hostname: node03 Uuid: 075c4737-17fb-4476-9668-02dab9315d85 State: Peer in Cluster (Connected) # confirm existing volume [root@node01 ~]# gluster volume info Volume Name: vol_distributed Type: Distribute Volume ID: 500dd4da-1fb6-4209-9653-3e9741d27552 Status: Started Snapshot Count: 0 Number of Bricks: 2 Transport-type: tcp Bricks: Brick1: node01:/glusterfs/distributed Brick2: node02:/glusterfs/distributed Options Reconfigured: transport.address-family: inet storage.fips-mode-rchecksum: on nfs.disable: on # add new node [root@node01 ~]# gluster volume add-brick vol_distributed node03:/glusterfs/distributed volume add-brick: success # confirm volume info [root@node01 ~]# gluster volume info Volume Name: vol_distributed Type: Distribute Volume ID: 500dd4da-1fb6-4209-9653-3e9741d27552 Status: Started Snapshot Count: 0 Number of Bricks: 3 Transport-type: tcp Bricks: Brick1: node01:/glusterfs/distributed Brick2: node02:/glusterfs/distributed Brick3: node03:/glusterfs/distributed Options Reconfigured: transport.address-family: inet storage.fips-mode-rchecksum: on nfs.disable: on # after adding new node, run rebalance volume [root@node01 ~]# gluster volume rebalance vol_distributed fix-layout start volume rebalance: vol_distributed: success: Rebalance on vol_distributed has been started successfully. Use rebalance status command to check status of the rebalance process. ID: 2fb6f2ce-5a24-4cb6-9763-7c444d43e44e # OK if [Status] turns to [completed] [root@node01 ~]# gluster volume status Status of volume: vol_distributed Gluster process TCP Port RDMA Port Online Pid ------------------------------------------------------------------------------ Brick node01:/glusterfs/distributed 49152 0 Y 2630 Brick node02:/glusterfs/distributed 49152 0 Y 2592 Brick node03:/glusterfs/distributed 49152 0 Y 3427 Task Status of Volume vol_distributed ------------------------------------------------------------------------------ Task : Rebalance ID : 2fb6f2ce-5a24-4cb6-9763-7c444d43e44e Status : completed |
| Sponsored Link |
|
|