CentOS 7
Sponsored Link

OpenStack Rocky : Add Compute Nodes
2018/08/31
 
Add Compute Nodes to run more instances.
This example is based on the emvironment like follows.
------------+-----------------------------+------------
            |                             |
        eth0|10.0.0.30                eth0|10.0.0.51
+-----------+-----------+     +-----------+-----------+
|    [ Control Node ]   |     |    [ Compute Node ]   |
|                       |     |                       |
|  MariaDB    RabbitMQ  |     |        Libvirt        |
|  Memcached  httpd     |     |      Nova Compute     |
|  Keystone   Glance    |     |                       |
|  Nova API             |     |                       |
+-----------------------+     +-----------------------+

[1]
Install KVM Hypervisor on Compute Node.
It's unnecessarry to set Bridge networking on the section [2] of the link.
[2] Install Nova-Compute.
# install from Rocky, EPEL

[root@node01 ~]#
yum --enablerepo=centos-openstack-rocky,epel -y install openstack-nova-compute
[3] Configure Nova.
[root@node01 ~]#
mv /etc/nova/nova.conf /etc/nova/nova.conf.org

[root@node01 ~]#
vi /etc/nova/nova.conf
# create new

[DEFAULT]
# define own IP address
my_ip = 10.0.0.51
state_path = /var/lib/nova
enabled_apis = osapi_compute,metadata
log_dir = /var/log/nova
# RabbitMQ connection info
transport_url = rabbit://openstack:password@10.0.0.30

[api]
auth_strategy = keystone

# enable VNC
[vnc]
enabled = True
server_listen = 0.0.0.0
server_proxyclient_address = $my_ip
novncproxy_base_url = http://10.0.0.30:6080/vnc_auto.html 

# Glance connection info
[glance]
api_servers = http://10.0.0.30:9292

[oslo_concurrency]
lock_path = $state_path/tmp

# Keystone auth info
[keystone_authtoken]
www_authenticate_uri = http://10.0.0.30:5000
auth_url = http://10.0.0.30:5000
memcached_servers = 10.0.0.30:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = nova
password = servicepassword

[placement]
auth_url = http://10.0.0.30:5000
os_region_name = RegionOne
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = placement
password = servicepassword

[wsgi]
api_paste_config = /etc/nova/api-paste.ini

[root@node01 ~]#
chmod 640 /etc/nova/nova.conf

[root@node01 ~]#
chgrp nova /etc/nova/nova.conf

[4] If SELinux is enabled, change policy like follows.
[root@node01 ~]#
yum --enablerepo=centos-openstack-rocky -y install openstack-selinux

[5] If Firewalld is running, allow service ports.
[root@node01 ~]#
firewall-cmd --add-port=5900-5999/tcp --permanent

success
[root@node01 ~]#
firewall-cmd --reload

success
[6] Start Nova Compute Service.
[root@node01 ~]#
systemctl start openstack-nova-compute

[root@node01 ~]#
systemctl enable openstack-nova-compute

[7] Make sure the status of Nova services on Controle Node like here. If all State is [up], they are running normally.
# discover Compute Nodes

[root@dlp ~(keystone)]#
su -s /bin/bash nova -c "nova-manage cell_v2 discover_hosts"
[root@dlp ~(keystone)]#
openstack compute service list

+----+------------------+------------------+----------+---------+-------+----------------------------+
| ID | Binary           | Host             | Zone     | Status  | State | Updated At                 |
+----+------------------+------------------+----------+---------+-------+----------------------------+
|  3 | nova-consoleauth | dlp.srv.world    | internal | enabled | up    | 2018-08-31T05:13:18.000000 |
|  4 | nova-conductor   | dlp.srv.world    | internal | enabled | up    | 2018-08-31T05:13:18.000000 |
|  5 | nova-scheduler   | dlp.srv.world    | internal | enabled | up    | 2018-08-31T05:13:18.000000 |
|  6 | nova-compute     | dlp.srv.world    | nova     | enabled | up    | 2018-08-31T05:13:19.000000 |
|  7 | nova-compute     | node01.srv.world | nova     | enabled | up    | 2018-08-31T05:13:21.000000 |
+----+------------------+------------------+----------+---------+-------+----------------------------+
Matched Content
 
Tweet