OpenStack Icehouse : Configure Neutron#2(Network Node)2014/06/25 |
|
Configure OpenStack Network Service (Neutron).
For this example, Install Neutron Server on Control Node which Keystone/Glance/Nova API are already installed,
and Install DHCP Agent, L3 Agent, L2 Agent, Metadata Agent on Network Node, and also Install L2 Agent on Compute Node on here.
( it's possible to install on a server as All-in-One, though, if you want )
Neutron needs a plugin software, it's possible to choose it from some softwares. This example chooses ML2 plugin.
( it uses Open vSwitch under the backend )
|
+------------------+ | +------------------------+
| [ Control Node ] | | | [ Network Node ] |
| Keystone |10.0.0.30 | 10.0.0.50| DHCP Agent |
| Glance |------------+------------| L3 Agent |
| Nova API |eth0 | eth0| L2 Agent |
| Neutron Server | | | Metadata Agent |
+------------------+ | +------------------------+
eth0|10.0.0.51
+--------------------+
| [ Compute Node ] |
| Nova Compute |
| L2 Agent |
+--------------------+
|
|
Configure Network Node on here.
|
|
| [1] | Change Kernel parameters for IP fowarding and so on. |
|
[root@network ~]# sed -i -e "s/net.ipv4.ip_forward = 0/net.ipv4.ip_forward = 1/" /etc/sysctl.conf [root@network ~]# sed -i -e "s/net.ipv4.conf.default.rp_filter = 1/net.ipv4.conf.default.rp_filter = 0/" /etc/sysctl.conf [root@network ~]# echo 'net.ipv4.conf.all.rp_filter=0' >> /etc/sysctl.conf [root@network ~]# sysctl -p |
| [2] | Install some packages for Network. |
|
[root@network ~]# yum --enablerepo=openstack-icehouse,epel -y install openstack-neutron openstack-neutron-ml2 openstack-neutron-openvswitch
|
| [3] | Configure as a Network node. |
|
[root@network ~]#
vi /etc/neutron/neutron.conf # line 55: add core_plugin = ml2
# line 64: add service_plugins = router
# line 70: uncomment and change auth_strategy = keystone
# line 87: uncomment dhcp_agent_notification = True # line 105: uncomment rpc_backend = neutron.openstack.common.rpc.impl_kombu # line 118: uncomment control_exchange = neutron # line 134: uncomment and change (specify RabbitMQ server) rabbit_host = 10.0.0.30
# line 136: uncomment and change (password of RabbitMQ user) rabbit_password = password
# line 138: uncomment rabbit_port = 5672 # line 143: uncomment and change (RabbitMQ user) rabbit_userid = guest
# line 394: change like follows (auth info for Keystone) auth_host = 10.0.0.30 auth_port = 35357 auth_protocol = http signing_dir = $state_path/keystone-signing admin_tenant_name = service admin_user = neutron admin_password = servicepassword
[root@network ~]#
vi /etc/neutron/l3_agent.ini # line 11: uncomment interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver # line 23: uncomment use_namespaces = True # line 47: add (it's OK to keep value empty (set it if needed)) external_network_bridge =
[root@network ~]#
vi /etc/neutron/dhcp_agent.ini # line 16: uncomment interface_driver = neutron.agent.linux.interface.OVSInterfaceDriver # line 31: uncomment dhcp_driver = neutron.agent.linux.dhcp.Dnsmasq # line 35: uncomment use_namespaces = True
[root@network ~]#
vi /etc/neutron/metadata_agent.ini # line 6: change (specify endpoint of keystone) auth_url = http:// 10.0.0.30:35357/v2.0
# line 12: change (auth info ofr keystone) admin_tenant_name = service admin_user = neutron admin_password = servicepassword # line 20: uncomment and specify Nova API server nova_metadata_ip = 10.0.0.30
# line 23: uncomment nova_metadata_port = 8775 # line 29: uncomment and specify any secret key you like metadata_proxy_shared_secret = metadata_secret
[root@network ~]#
vi /etc/neutron/plugins/ml2/ml2_conf.ini # line 7: add
type_drivers = flat,vlan,gre
tenant_network_types = vlan,gre mechanism_drivers = openvswitch # add at the last line: uncomment & add enable_security_group = True firewall_driver = neutron.agent.linux.iptables_firewall.OVSHybridIptablesFirewallDriver
mv /etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini /etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini.org [root@network ~]# ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini [root@network ~]# ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugins/openvswitch/ovs_neutron_plugin.ini [root@network ~]# /etc/rc.d/init.d/openvswitch start /etc/openvswitch/conf.db does not exist ... (warning). Creating empty database /etc/openvswitch/conf.db [ OK ] Starting ovsdb-server [ OK ] Configuring Open vSwitch system IDs [ OK ] Inserting openvswitch module [ OK ] Starting ovs-vswitchd [ OK ] Enabling remote OVSDB managers [ OK ][root@network ~]# chkconfig openvswitch on [root@network ~]# ovs-vsctl add-br br-int [root@network ~]# for service in dhcp-agent l3-agent metadata-agent openvswitch-agent; do /etc/rc.d/init.d/neutron-$service start chkconfig neutron-$service on done Starting neutron-dhcp-agent: [ OK ] Starting neutron-l3-agent: [ OK ] Starting neutron-metadata-agent: [ OK ] Starting neutron-openvswitch-agent: [ OK ] |
| Sponsored Link |
|
|