KVM : Use VirtualBMC2023/02/28 |
Install VirtualBMC to enable IPMI commands to Virtual mashines.
VirtualBMC supports a small part of IPMI commands like power on/off operation, however, it is sometimes useful. |
|
[1] | Install VirtualBMC on KVM Host. |
# create Python virtual environment under the [/opt/virtualbmc] [root@dlp ~]# python3 -m venv --system-site-packages /opt/virtualbmc
# install VirtualBMC [root@dlp ~]# /opt/virtualbmc/bin/pip3 install virtualbmc # create new [Unit] Description=Virtual BMC Service After=network.target libvirtd.service [Service] Type=simple ExecStart=/opt/virtualbmc/bin/vbmcd --foreground ExecStop=/bin/kill -HUP $MAINPID User=root Group=root [Install] WantedBy=multi-user.target # show status (OK if no error is shown) [root@dlp ~]# /opt/virtualbmc/bin/vbmc list
|
[2] | Set VirtualBMC to virtual machines. |
[root@dlp ~]# virsh list --all Id Name State ----------------------------- - almalinux9 shut off - rx-7 shut off - rx-8 shut off # set VirtualBMC to a VM [rx-7] # for [port], [username], [password], it's OK to set any values you like [root@dlp ~]# /opt/virtualbmc/bin/vbmc add rx-7 --port 6230 --username vbmcadmin --password adminpassword
/opt/virtualbmc/bin/vbmc list +-------------+--------+---------+------+ | Domain name | Status | Address | Port | +-------------+--------+---------+------+ | rx-7 | down | :: | 6230 | +-------------+--------+---------+------+ # start VirtualBMC [root@dlp ~]# /opt/virtualbmc/bin/vbmc start rx-7
/opt/virtualbmc/bin/vbmc list +-------------+---------+---------+------+ | Domain name | Status | Address | Port | +-------------+---------+---------+------+ | rx-7 | running | :: | 6230 | +-------------+---------+---------+------+[root@dlp ~]# /opt/virtualbmc/bin/vbmc show rx-7 +-----------------------+----------------+ | Property | Value | +-----------------------+----------------+ | active | True | | address | :: | | domain_name | rx-7 | | libvirt_sasl_password | *** | | libvirt_sasl_username | None | | libvirt_uri | qemu:///system | | password | *** | | port | 6230 | | status | running | | username | vbmcadmin | +-----------------------+----------------+ # show status of power on [rx-7] via VirtualBMC [root@dlp ~]# ipmitool -I lanplus -H 127.0.0.1 -p 6230 -U vbmcadmin -P adminpassword power status Chassis Power is off # power on via VirtualBMC [root@dlp ~]# ipmitool -I lanplus -H 127.0.0.1 -p 6230 -U vbmcadmin -P adminpassword power on Chassis Power Control: Up/On virsh list --all Id Name State ----------------------------- 1 rx-7 running - almalinux9 shut off - rx-8 shut off # power off via VirtualBMC [root@dlp ~]# ipmitool -I lanplus -H 127.0.0.1 -p 6230 -U vbmcadmin -P adminpassword power off Chassis Power Control: Down/Off virsh list --all Id Name State ----------------------------- - almalinux9 shut off - rx-7 shut off - rx-8 shut off |
[3] | If you'd like to use VirtualBMC not on KVM Host but on other Hosts, configure like follows. For SSH key-pair settings, it had beetr to change sshd setting to [PermitRootLogin prohibit-password] after setting key-pair. |
# generate SSH key-pair and set to own host [root@dlp ~]# ssh-keygen -q -N "" Enter file in which to save the key (/root/.ssh/id_rsa): [root@dlp ~]# mv ~/.ssh/id_rsa.pub ~/.ssh/authorized_keys
[root@dlp ~]#
[root@dlp ~]# ssh 10.0.0.30 hostname dlp.srv.world virsh list --all Id Name State ----------------------------- 1 rx-7 running - almalinux9 shut off - rx-8 shut off # set VirtualBMC to [rx-8] # for [--libvirt-uri], specify KVM Host [root@dlp ~]# /opt/virtualbmc/bin/vbmc add rx-8 --port 6231 --username vbmcadmin --password adminpassword --libvirt-uri qemu+ssh://root@10.0.0.30/system [root@dlp ~]# /opt/virtualbmc/bin/vbmc start rx-8
/opt/virtualbmc/bin/vbmc list +-------------+---------+---------+------+ | Domain name | Status | Address | Port | +-------------+---------+---------+------+ | rx-7 | running | :: | 6230 | | rx-8 | running | :: | 6231 | +-------------+---------+---------+------+[root@dlp ~]# /opt/virtualbmc/bin/vbmc show rx-8 +-----------------------+----------------------------------+ | Property | Value | +-----------------------+----------------------------------+ | active | True | | address | :: | | domain_name | rx-8 | | libvirt_sasl_password | *** | | libvirt_sasl_username | None | | libvirt_uri | qemu+ssh://root@10.0.0.30/system | | password | *** | | port | 6231 | | status | running | | username | vbmcadmin | +-----------------------+----------------------------------+ # if Firewalld is running, allow setting ports [root@dlp ~]# firewall-cmd --add-port=6231/udp [root@dlp ~]# firewall-cmd --runtime-to-permanent # that's OK
# for SSH key-pair generated on KVM Host, it needs to transfer private-key [id_rsa] to the Hosts you'd like to use VirtualBMC
# for example, execute ipmitool on [rx-7] host to [rx-8] host
# got private key from KVM host [root@rx-7 ~]# ll .ssh total 8 -rw-------. 1 root root 2602 Feb 4 19:04 id_rsa -rw-r--r--. 1 root root 171 Feb 4 19:04 known_hosts
[root@rx-7 ~]#
ssh 10.0.0.30 hostname dlp.srv.world
[root@rx-7 ~]#
ipmitool -I lanplus -H 10.0.0.30 -p 6231 -U vbmcadmin -P adminpassword power status Chassis Power is off
[root@rx-7 ~]#
[root@rx-7 ~]# ipmitool -I lanplus -H 10.0.0.30 -p 6231 -U vbmcadmin -P adminpassword power on Chassis Power Control: Up/On ssh 10.0.0.30 "virsh list" Id Name State ---------------------- 1 rx-7 running 2 rx-8 running |
Sponsored Link |
|