CentOS 7
Sponsored Link

OpenStack Queens : Configure Neutron#5 (Compute Node)2018/03/07

 
Configure OpenStack Network Service (Neutron).
This example is not All in One Settings like here, but Configure the 3 Nodes environment like follows. Neutron needs a plugin software, it's possible to choose it from some softwares. This example chooses ML2 plugin. ( it uses Open vSwitch under the backend )
     ------------+---------------------------+---------------------------+------------
                 |                           |                           |
             eth0|10.0.0.30              eth0|10.0.0.50              eth0|10.0.0.51
     +-----------+-----------+   +-----------+-----------+   +-----------+-----------+
     |    [ Control Node ]   |   |    [ Network Node ]   |   |    [ Compute Node ]   |
     |                       |   |                       |   |                       |
     |  MariaDB    RabbitMQ  |   |      Open vSwitch     |   |        Libvirt        |
     |  Memcached  httpd     |   |        L2 Agent       |   |     Nova Compute      |
     |  Keystone   Glance    |   |        L3 Agent       |   |      Open vSwitch     |
     |  Nova API             |   |     Metadata Agent    |   |        L2 Agent       |
     |  Neutron Server       |   |                       |   |                       |
     |  Metadata Agent       |   |                       |   |                       |
     +-----------------------+   +-----------------------+   +-----------------------+

[1] Install Neutron services on Compute Node.
# install from Queens, EPEL

[root@node01 ~]#
yum --enablerepo=centos-openstack-queens,epel -y install openstack-neutron openstack-neutron-ml2 openstack-neutron-openvswitch
[2] Configure as a Compute node.
[root@node01 ~]#
mv /etc/neutron/neutron.conf /etc/neutron/neutron.conf.org

[root@node01 ~]#
vi /etc/neutron/neutron.conf
# create new

[DEFAULT]
core_plugin = ml2
service_plugins = router
auth_strategy = keystone
state_path = /var/lib/neutron
allow_overlapping_ips = True
# RabbitMQ connection info
transport_url = rabbit://openstack:password@10.0.0.30

# Keystone auth info
[keystone_authtoken]
www_authenticate_uri = http://10.0.0.30:5000
auth_url = http://10.0.0.30:5000
memcached_servers = 10.0.0.30:11211
auth_type = password
project_domain_name = default
user_domain_name = default
project_name = service
username = neutron
password = servicepassword

[oslo_concurrency]
lock_path = $state_path/lock

[root@node01 ~]#
chmod 640 /etc/neutron/neutron.conf

[root@node01 ~]#
chgrp neutron /etc/neutron/neutron.conf

[root@node01 ~]#
vi /etc/neutron/plugins/ml2/ml2_conf.ini
# line 129: add ( it's OK with no value for "tenant_network_types" (set later if need) )

[ml2]
type_drivers = flat,vlan,gre,vxlan
tenant_network_types =
mechanism_drivers = openvswitch,l2population
extension_drivers = port_security
[root@node01 ~]#
vi /etc/neutron/plugins/ml2/openvswitch_agent.ini
# line 308: add

[securitygroup]
firewall_driver = openvswitch
enable_security_group = true
enable_ipset = true
[root@node01 ~]#
vi /etc/nova/nova.conf
# add follows into [DEFAULT] section

use_neutron = True
linuxnet_interface_driver = nova.network.linux_net.LinuxOVSInterfaceDriver
firewall_driver = nova.virt.firewall.NoopFirewallDriver
vif_plugging_is_fatal = True
vif_plugging_timeout = 300

# add follows to the end: Neutron auth info
# the value of metadata_proxy_shared_secret is the same with the one in metadata_agent.ini
[neutron]
auth_url = http://10.0.0.30:5000
auth_type = password
project_domain_name = default
user_domain_name = default
region_name = RegionOne
project_name = service
username = neutron
password = servicepassword
service_metadata_proxy = True
metadata_proxy_shared_secret = metadata_secret
[3] If SELinux is enabled, change policy like follows.
[root@node01 ~]#
setsebool -P neutron_can_network on

[root@node01 ~]#
setsebool -P daemons_enable_cluster_mode on

[root@node01 ~]#
yum --enablerepo=centos-openstack-queens -y install openstack-selinux

[4] Start Neutron services.
[root@node01 ~]#
ln -s /etc/neutron/plugins/ml2/ml2_conf.ini /etc/neutron/plugin.ini

[root@node01 ~]#
systemctl start openvswitch

[root@node01 ~]#
systemctl enable openvswitch

[root@node01 ~]#
ovs-vsctl add-br br-int

[root@node01 ~]#
systemctl restart openstack-nova-compute

[root@node01 ~]#
systemctl start neutron-openvswitch-agent

[root@node01 ~]#
systemctl enable neutron-openvswitch-agent

Matched Content